!
!

3006b Snap Switch w/ Guard

Only
!
3006b
Snap Switch w/ Guard

Description:  Snap Switch 22 amp w/ sureguard

3007 Thermostat Water

Only
!
3007
Thermostat Water
 Used with #3122 Thermostat and all our equipment. 3" Diameter.

3012 Fan Motor, Blade & Mounting Bracket

Only
!
3012
Fan Motor, Blade & Mounting Bracket

Description:  210 CFM. Used in Professional Models.

3014 Heating Element

Only
!
3014
Heating Element

Description:  For use in all GQF Cabinet Incubators.

3015 Heating Element with wire Leads & 6 Insulators

Only
!
3015
Heating Element with wire Leads & 6 Insulators

Description:  For use in all GQF cabinet incubators.

3018 Dial Thermometer

Only
!
3018
Dial Thermometer

Description:  This is the most accurate incubator thermometer available and has 5" stem which can be inserted in 5/32" hole to permit reading of temperature from outside of incubator. The 2" dial permits easy and accurate reading of temperature and is graduated in one degree increments from 30 degrees to 130 degrees. (Standard equipment on Cabinet Incubators)

The No. 3018 Thermometer is supplied with wick and may be used as a Hygrometer in circulated air incubators by mounting a water bottle below the tip of the thermometer. Slide wick about 4" on to the T hermometer stem and imerse other end in water bottle for most accurate wet bulb temperature. Be sure to keep wick clean for most accurate reading.

3020 Hygrometer Wicks

Only
!
3020
Hygrometer Wicks

Description:  Replacement wicks. Place one end on #3018 thermometer and other end in water pan to take a wet bulb humidity reading.

3020ft Wick Materail per Foot

Only
!
3020ft
Wick Materail per Foot
Wick Materail per Foot

3021 Automatic Turner Complete

Only
!
3021
Automatic Turner Complete
Description:  Prewired, complete with turner drive motor, timing motor, pilot light and 3 position toggle switch. Used on all GQF Cabinet Incubators.

3022 Drive Motor

Only
!
3022
Drive Motor

Description:  Drive Motor for cabinet incubator

3030 Auto Humidity System

Only
!
3030
Auto Humidity System

Description:  Consists of 5 gallon reserve tank, connecting hose, quick coupler, shut off clamp, large constant level humidity pan and 1 humidity pad. For all GQF Cabinet Cabinet Incubators.

3031 Moisture Pan with Float, Hose & 2 Humidity Pads

Only
!
3031
Moisture Pan with Float, Hose & 2 Humidity Pads

Description:  Auto Humidity Pan with Float, Hose, Quick Disconnect, Shut Off Clamp, and 2 Humidity Pads. (Includes All the items in product #3030 except the 5 gallon bucket and the hose fitting on the 5 gallon bucket)

3032 Float Valve Assembly for 3031 Moisture Pan

Only
!
3032
Float Valve Assembly for 3031 Moisture Pan

Description:  Float Valve Assembly for 3031 Moisture Pan

3034 Cherry Switch for #3023 Timing motor

Only
!
3034
Cherry Switch for #3023 Timing motor
Cherry Switch for #3023 Timing motor

3045 8 ft Gasket for Door

Only
!
3045
 8 ft Gasket for Door

Description:  8ft Gasket for Door. For cabinet incubator.

3049 2 Thermostats wired for cabinet incubator - Complete

Only
!
3049
2 Thermostats wired for cabinet incubator - Complete

Description:  Includes 2 wafer and snap switch thermostats wired in series complete with L shaped adjusting screws and wing nuts. Used in all GQF cabinet incubators.

3065 Clear Viewing Door

Only
!
3065
Clear Viewing Door
Description:  Clear plastic door for all GQF Cabinet Incubators and Hatchers. CLEAR ACRYLIC DOOR gives full frontal view of interior of incubator, to permit checking of hatching progress, tray turning, water level, etc. Comes complete with new hinges and latches for customer installation by removing 8 screws and replacing new door with same 8 screws. 31 1/4" X 15 1/2" X 1/2" - Sold as an accessory for customers installation only.

3066 Hatching Tray 24.5" x 14"

Only
!
3066
Hatching Tray 24.5" x 14"

Description:  Hatching Tray 24.5" x 14"

3067 Turning Tray 24.5" x 12.75"

Only
!
3067
Turning Tray 24.5" x 12.75"

Description:  Hatching Tray 24.5" x 12.75"

3068 Hatching Tray Cover 24.5" x 14"

Only
!
3068
Hatching Tray Cover 24.5" x 14"

Description:  Hatching Tray Cover 24.5" x 14"